Also visit: NorthwestMissouriRealty.com
Presenting 39 upcoming auctions in Northwest Missouri
and 120 auctions throughout South Iowa and North Missouri

Supreme Electric Co. Auction

Location: 213 South 10th St., Quincy, IL

9 AM Thursday October 25th, 2018
INVENTORY REDUCTION
Click on thumbnail to see larger photo and description
Inventory Reduction

This listing posted Sept. 28; for updates or more photos and info, CLICK HERE

NO RESERVE
INVENTORY REDUCTION AUCTION

 
ROLLING STOCK & SUPPORT EQUIPMENT
  • ’99 Freightliner FL80 truck with Altec D947-TR Derrick body, Cat 7.2L diesel eng., Allison auto trans., 3-stage boom, 2-speed digger complete with Pengo 10” & 18” full flight augers with Pengo boring head, Altec service body, 2,177 hours on Derrick, 3,904 hours and 33,588 miles, VIN 1FV6JJBB8XHA42219
  • Vermeer D6 Navigator directional drilling machine, Kubota diesel eng., 300’ of drill stems, 4.5” and 6.5” spiral back reamers, Vermeer ST300 mixing system, hose reel with 100’ of 1” hose, 2.5”, 3” and 4” expandable sleeve taper puller, 2” expandable puller, 200’ pulling chain and chain tensioner, 1,226 hours, SN 1VPL12096R1000421, sells complete with Digitrak Mark III locating system with receiver and remote and Belshe T-14 tandem axle trailer
  • ’02 Vermeer V-8550 trencher/plow/backhoe, Cummins turbo diesel eng., hydro., creeper override, 6-way blade, Vermeer V9300 backhoe, VermeerPT8550 vibratory plow/trencher, 1,072 hours, SN 1VRK11243W1000931
  • Snorkel 25-46 scissor lift, 25’ lift, 2-speed drive and lift, 3’ platform deck extension, SN 9310501293
  • ’00 Overbilt 10-ton 30’ flatbed trailer, 24’ deck, 6’ dovetail with flip up ramps, pintle hitch, dual tandem axle, air brakes, VIN 1Z9DC3423Y0058216
  • Coose 28’ gooseneck flatbed trailer, 24’ deck, 4’ dovetail with 4 ramps, dual tandem axle, VIN 1272-222-1985
  • Kiefer ICH-6000 hyd. cable reel trailer, 54”x108” reel, pintle hitch
  • Arrowmaster M90 solar assist arrow board on trailer, on-board AC charger
  • Greenlee 686 cable pulling system, Greenlee 640 power cable puller, pipe adapter sheave, boom extension kit, 649MA mobile attachment unit, 300’ of poly rope, complete in steel storage box
  • Greenlee 6805 Ultra Tugger cable pulling system complete with Versi-Boom system, assorted slip-in couplers and screw-on couplers, 300’ of 7/8” double braided rope, 15,000 lb. swivel
  • Ensley E440-84 heavy duty 2-speed power cable puller, pipe adapter sheave, boom extension kit, 300’ of poly rope, complete in steel storage box
  • Greenlee 7/8″ X 600′ Double Braided Composite Rope
  • Greenlee #00967 Deluxe Force Gauge to measure rope tension
  • Greenlee 805 Fiber Optic Puller w/mounting bracket and 1,290 feet of 3/8″ Polyester rope
  • Enerpac S-353 One Shot/Sweep Rigid hyd. bender w/1 1/4″, 4″ One Shot shoes and a 5″ sweep shoe powered by electric pump on Bending Table.
  • McLaughlin Mfg. M-1800 Mighty Mole 6HP Boring Unit, (10) 10’x7/8” drill rods, assorted back reamers and 3-2” moles
  • Vermeer 3″ Hammerhead Mole w/75 foot of hoses w/swivel couplings and oiler
  • PRO-35-14 Target Concrete Saw 14″ Blade Capacity 35 HP Wisconsin Motor
  • DeWalt 5 HP, 16″ Radial Arm Saw w/Conveyor Table and 2-Metal and 1-Wood Blades
  • Pengo Dirt 20″ Auger (NEW)
  • Pengo Dirt 24″ Auger
  • Pengo Dirt 28″ Auger w/side cutters
  • Pengo Dirt 36″ Auger
  • Helix Foundation Universal Installation Drive Assembly
  • 2 1/2″ X 72″ Kelly Bar
  • Bessemer Model 2000 Electric Cable & Wire Measuring Machine 2″ Capacity
  • Large Spinning Wire Table
  • Gardner Denver Electric Screw Air Compressor, Model EBBODA, Serial U05717, 175 PSI, 15 HP, 230 Volt, 3 Phase with Refrigerated Dryer Model 7000014, 120 Volt

Electrical Materials:
RACO 777 4 Sq. 1/4” Rise 2 Gang; RAC0 778 4 Sq. 1/2” Rise 2 Gang; RACO 779 4 Sq. 3/4” Rise 2 Gang; RACO 780 4 Sq. 1” Rise 2 Gang; RACO 781 4 Sq. 1-1/4” Rise 2 Gang; RACO 795 4 Sq. 1-1/2” Rise 2 Gang; RACO 796 4 Sq. 2” Rise 2 Gang; RACO 841 4-11/16 Sq. 1/2” Rise 2 Gang; RACO 885 4-11/16 Sq. 1-1/2 Rise 2 Gang; RACO 886 4-11/16 Sq. 2” Rise 2 Gang; RACO 838 4-11/16 Sq. 3/4” Rise 1 Gang; RACO 770 4 Sq. 1/4” Rise 1 Gang; RACO 722 4 Sq. 1/2” Rise 1 Gang; RACO 773 4 Sq. 3/4” Rise 1 Gang; RACO 837 4-11/16 1/2” Rise 1 Gang; RACO 839 4-11/16 1” Rise 1 Gang; RACO 898 4-11/16 1-1/2” Rise 1 Gang; RACO 823 4 Gang Device Cover; RACO 824 5 Gang Device Cover; RACO 954 5 Gang 1-5/8” Box; RACO 231 4 Sq. 2-1/8” Deep 3/4” KO; RACO 259 4-11/16 2-1/8 Deep 1-1/4” KO; RACO 191 4 Sq. 1-1/2” Deep 3/4” KO; 1/2” Plastic Bushing; 1/2” Grounding Bushing; 3/4” Plastic Bushing; 3/4” Metal Insulated Bushing; 3/4” Grounding Bushing; 1” Metal Insulated Bushing; 1” Grounding Bushing; 1-1/2” Metal Insulated Bushing; 3-1/2” Grounding Bushing; 3-1/2” Metal Insulated Bushing; 3/4” Locknuts; 1” Locknuts; 1-1/4” Locknuts; 1-1/2” Locknuts; 5” Locknuts; 1/2” Rigid Set Screw Connectors; 3/4” Rigid Set Screw Connectors; 3/4” Rigid Offset Set-Screw Connectors; 1-1/4” Rigid Set Screw Connectors; 1-1/4” Rigid Compression Connectors; 1/2” Rigid Set-Screw Couplings; 1/2” Rigid Set-Compression Couplings; 3/4” Rigid Set-Screw Couplings; 1” Rigid Set-Screw Couplings; 1-1/2” Rigid Set-Screw Couplings; 3/4” EMT Crimp Connectors; 1” EMT Crimp Connectors; 1/2” EMT Offset Crimp Connectors; 3/4” EMT Offset Crimp Connectors; 1” EMT Offset Crimp Connectors; 1/2” EMT Crimp Couplings; 3/4” EMT Crimp Couplings; 1” EMT Crimp Coupling; 1/2” EMT Raintite Connectors; 1/2” EMT Raintite Couplings; 3/4” EMT Raintite Couplings; 1” EMT Raintite Couplings; 1-1/4” EMT Raintite Couplings; 1-1/2” EMT Raintite Connectors; 1-1/2” EMT Raintite Couplings; 2” EMT Raintite Couplings; 2-1/2” EMT Raintite Couplings; 1/2” EMT Set Screw Offset Connectors; 1/2 EMT Raintite Offset Connectors; 3/4” EMT Set Screw Offset Connectors; 3/4” EMT Raintite Offset Connectors; 1” EMT Set Screw Offset Connectors; 1” EMT Raintite Offset Connectors; 1/2” EMT 2-Hole Straps; 3/4” EMT 2-Hole Straps; 3/4” EMT Single Hole Straps; 1-1/4” EMT Single Hole Straps; 1-1/2” EMT Single Hole Straps; 2” EMT Single Hole Straps; 3/4” Rigid Single Hole Straps; 2-1/2” Rigid Single Hole Straps; 3” Rigid Single Hole Straps; 3-1/2” Rigid Single Hole Straps; Backstraps 3 – 4” & 1 – 3”; 1/2” EMT Unstrust Straps; 1/2” Rigid Unstrust Straps; 1” Rigid Unstrust Straps; 1-1/4” EMT Unstrust Straps; 1-1/4” Rigid Unstrust Straps; 1-1/2” EMT Unstrust Straps; 1-1/2” Rigid Unstrust Straps; 2” Rigid Unstrust Straps; 2-1/2” Rigid Unstrust Straps; 3-1/2” Rigid Unstrust Straps; 4” Rigid Unstrust Straps; 6” Rigid Unstrust Straps; 3/4” Expansion Unstrust Straps; 1” Expansion Unstrust Straps; 1-1/4” Expansion Unstrust Straps; 1-1/2” Expansion Unstrust Straps; 2” Expansion Unstrust Straps; 2-1/2” Expansion Unstrust Straps; 4” Expansion Unstrust Straps; 1/2” Channel Hanger; 5/16” Unstrust Nuts; 3/8” Unstrust Nuts; 1/2” Unstrust Nuts; 2” EMT Set-Screw Coupling; 1-1/2” EMT Set-Screw Coupling; 3/4” EMT Set Screw Pulling Elbow; 1/2” Rigid – EMT Coupling; 3/4” Rigid – EMT Coupling; 1” Rigid – EMT Coupling; 1/2” 90º Raintite Connectors; 1-1/4” Offset Nipple; 1-1/2” Offset Nipple; 2” Offset Nipple; 1/2” EMT – 3/8” Greenfield Coupling; 1/2” EMT – 1/2” Greenfield Coupling; 1/2” Korn Clamps; 1” Korn Clamps; 1-1/4” Korn Clamps; 1-1/2” Korn Clamps; 2-1/2” Minnie; 1-1/4” – 1-1/2” Pipe Hangers; 1-1/4” Pipe Hangers; 1” Pipe Hangers; 1” Pipe Hangers; 1/2” Pipe Hangers; B-Line B172 Four Hole Unstust Splice; B-Line B280 Pole Base; B-Line B124 Nine Hole Triple Wing Connection; B-Line B314 Beam Clamp; B-Line B231 Two Hole Corner Angle; B-Line B202 Square Washer; Unstrust P2785 Beam Clamp; Unstrust P1796S Beam Clamp; Unstivol P1546 Angular Fitting; 1/2” Heavy Beam Clamps Galv.; 3/8” Heavy Beam Clamps Galv.; 1/4” Heavy Beam Clamps Galv.; 1/2” Heavy Beam Clamps Black; 3/8” Heavy Beam Clamps Black; 6-3 Entrance Cable Raintite Connector; 2-3 Entrance Cable Raintite Connector; 3/8” 90º Greenfield Connector; 1” 90º Greenfield Connector; 1-1/4” 90º Greenfield Connector; 2-1/2” 90º Greenfield Connector; 1-1/2” Straight Greenfield Connector; 2” Straight Greenfield Connector; 3” Straight Greenfield Connector; 3/8” 90º Liquitite Connector; 3/4” 90º Liquitite Connector; 1-1/2” Straight Liquitite Connector; 2” Straight Liquitite Connector; 1-1/2” 90º Liquitite Connector; 2” 90º Liquitite Connector; 2-1/2” 90º Liquitite Connector; 3” 90º Liquitite Connector; 3/4” Straight Romex Connector; 2” Straight Romex Connector; 3/8” Straight Liquitite Connector; 3/4” Hub Connector; 3-1/2” Hub Connector; 4” Hub Connector; 3/4” Chase Nipple; 3” Chase Nipple; 1/2” Hazardous listed Erickson; 1” Hazardous listed Erickson; 1” Erickson; 1-1/2” Erickson; 2-1/2” Erickson; 1/2” Split Coupling; 3/4” Split Coupling; 1” Split Coupling; 1-1/4” Split Coupling; 1-1/2” Split Coupling; 4” Split Coupling; 3/4” Pulling Elbow; 1” Pulling Elbow; 2” – 1-1/2” Reducing Bushing; 1” – 1/2” Reducing Bushing; 1” – 3/4” Reducing Bushing; 1-1/4” – 1/2” Reducing Bushing; 1-1/4” – 1” Reducing Bushing; 2-1/2” – 1-1/2” Reducing Bushing; 2-1/2” – 2” Reducing Bushing; 2-1/2” – 1” Reducing Bushing; 3-1/2” – 3” Reducing Bushing; 4” – 3-1/2” Reducing Bushing; 3-1/2” – 2-1/2” Reducing Washers; 3” – 2-1/2” Reducing Washers; 1-1/2” – 1” Reducing Washers; 1-1/2” – 1/2” Reducing Washers; 1” – 1/2” Reducing Washers; 1” – 3/4” Reducing Washers; 1/2” Straight Cord Connectors; 3/4” Straight Cord Connectors; 1” Straight Cord Connectors; 1-1/4” Straight Cord Connectors; 3/4” 90º Cord Connector; 1/2” 90º Cord Connector; 1/2” Straight Cord Connector w/Grip; 3/4” Straight Cord Connector w/Grip; 1/2” OTA Conduit Body; 3/4” OC Conduit Body; 3/4” OT Conduit Body; 1” OC Conduit Body; 1” OLR Conduit Body; 1-1/4” OLR Conduit Body; 1-1/4” OLL Conduit Body; 1-1/4” OLB Conduit Body; 2” OLL Conduit Body; 2-1/2” OLB Conduit Body; 3” OLB Conduit Body; 2-1/2” OLRL Conduit Body; 1” X Close Rigid Nipple; 1” X 2” Rigid Nipple; 3” X 5” Rigid Nipple; 3” X 6” Rigid Nipple; 3” X 4” Rigid Nipple; 3-1/2” X 8” Rigid Nipple; 4” X Close Rigid Nipple; Kernie Covers; Insulated Splice Connectors; ILSCO 600 MCM – #4 Insulated Splice; 3-1/2” Pipe – 4/0 Ground Fitting; 2” Pipe – 4/0 Ground Fitting; Bath-Tub Lugs; 3/4” Rod – 4/0 Wire Ground Clamps; ILSCO 350 MCM – 1/0 Copper Lugs; ILSCO 4/0 – #2 Copper Lugs; ILSCO #2 – #8 Copper Lugs; #10 – #12 Fork Crimp Lugs; 350 MCM Butt Splice Crimp; 250 MCM Butt Splice Crimp; 3/0 Butt Splice Crimp; #2 Solid Butt Splice Crimp; #2 Butt Splice Crimp; #4 Butt Splice Crimp; #1 Butt Splice Crimp; 1/0 Butt Splice Crimp; #6 Butt Splice Crimp; 400 MCM Lug; 4/0 Lug; 3/0 Lug; 2/0 Lug; #4 Lug; Marking Tape Colored; 1/4” J – Hooks; Caddy 8M24 Hangers; Caddu 812M24 Hangers; Caddy 16M24 Hangers; Caddy 16M58 Hangers; Caddy BG-20-U-2-4 Hangers; Caddy BG-32-U-2-4 Hangers; Caddy 12-P-24 Hangers; Caddy 4-T1-2-4 Hangers; Caddy Misc. Hangers; Caddy 4G9 Fixture Supports; Caddy Misc. Chips; Caddy HIT 1/2” Conduit Hanger; HIT 1” Conduit Hanger; HIT 3/4” Conduit Clips; Caddy TSGB16 Adjustable Brackets; Caddy K-20; Caddy K-16; Caddy K-12; Cable – Flance Clip; Porcelain House Knobs; 2-1/2 Amp Type E Fuse Links; 5 Amp Type Standard Fuse Links; 6 Amp Type T Fuse Link; 10 Amp Type T Fuse Links; 15 Amp Type K Fuse Links; 20 Amp Type Standard Fuse Link; 30 Amp Type K Fuse Links; 40 Amp Type K Fuse Links; 50 Amp Type T Fuse Links; 65 Amp Type K Fuse Links; 4” Porcelain 5KV Insulators; 5” Porcelain 5KV Insulators; 7” Porcelain 5KV Insulators; Johnnyball Strain Insulators; 28” Steel Crossarm Brace; 24” Guy Strain Insulator; 5KV Suspension Insulator; Porcelain House Knobs; T3 Fusetron Plug Fuse; T4 Fusetron Plug Fuse; T5 Fusetron Plug Fuse; T6-1/4 Fusetron Plug Fuse; T7 Fusetron Plug Fuse; W30 Fusetron Plug Fuse; NON10 Cartage Fuse; NON15 Cartage Fuse; FRN15 Cartage Fuse; NON70 Cartage Fuse; NON150 Cartage Fuse; NOS150 Cartage Fuse; NOS200 Cartage Fuse; OT400 Cartage Fuse; 15A Class G 3 Pole Fuseblock; 15A Class G 2 Pole Fuseblock; 60A Class H 3 Pole Fuseblock; 30A Class J 3 Pole Fuseblock; 350 MCM, 3 Pole, 600V Termal Block; 300 MCM, 3 Pole, 600V Termal Block; RTE 8.3/14.4 Feed Thru Insert; Jefferson 250 KVA Buck-Boost Transformers; Polyolefin Pull Line; Square D 9025 – BCW43 Temperature Switch 80_-145_; Square D 9001 – B30 Start-Stop Station; Square D 9001 – B35 Up-Down Station; Square D 9001- B37 On-Off Station; Square D 9001 – BG-204 Start-Stop Station; Square D 9006 = PWW 525A Proximity Switch; Square D 9008 – GCB-100 10A Circuit Breaker; Square D 9001 – KU5 Green Push Button Boat; Square D 9001 – KU2 Red Push Button Boat; Square D 9001 – KU-27 Protective Cap; Square D 9001 – G-9 Green Lens; Square D 9001 – K-31 3-Pos Joy Stick; Square D DD-300 Overload Thermal Unit; Square D 9001 – KN204R Off Legends; 4 Pole NO-NC 120V Coil Plug-In Relay; 2 Pole NO-NC 240V Coil Plug-In Relay; 2 Pole NO-NC 12V Coil Plug-In Relay; Hobbs 120V Total Hour Counter; Datcon 120V Total Hour Counter; Electro Switch Rotary Switch Voltmeter; Potter & Brumfield DPDT 10A 120V Timing Relay; GE Synchroscope 120V; Electric Door Strike 120V; Penn Air Pressure Switch 3-30 PSI; Honeywell L4029E-1037 Duct 125º Limit Switch; Honeywell T921A-1191 Thermostat; Honeywell T874F-1015 Thermostat; Honeywell R482A-1008 Switching Relay; Honeywell T675A-1540 Rmote Bulb Temperature Controller 55_-175º F; Penn-Baso Thermostat Guard; Carrier 40RR900181 3 Pole Contactor; Thermoswitch Bulb Thermostat 100-600F; 240 Volt, 3 Wire, Electric Meter; 1/2” Pipe Clamp – Rigid, IMC, EMT; 1-1/4” Pipe Clamp – Rigid, IMC, EMT; 1-1/2” Pipe Clamp – Rigid, IMC, EMT; 2” Pipe Clamp – Rigid, IMC, EMT; 3/8” Cone Nuts; 1/2” Cone Nuts; 3/8” Square Washers; 1/2” Square Washers; 1/2” X 15/16” Hex Bolts; Unstrust 2-Hole Flat Plate; Unstrust 3-Hole Flat Conner Plate; Unstrust 4-Hole Flat Plate; Caution ”Electric” Underground Tape; Appleton CPL-2023B, 20 Amp, 125V Plug; Appleton CPLC-23, 20 Amp, 125V Receptacle; Appleton EHRA 56K, 20 Amp, 125V Receptacle; Midwest #328 1-1/4” Capped Elbow; OZ EL-975 3/4” Elbow; Killark SWB 1 Gang Cast Box; Appleton VU-100 Fixture w/ JB-1 Mounting Hood; Crouse Hinds VN75 Red Globe; Walkerduct 800 Floor Box; TWR Single Obstruction Light; Hoffman A8R64HCR Enclosure; Bell 5390 3-Gang Box; Bell 5393 3-Gang Switch-Outlet Cover; Bell 5180 1-Gang Duplex Cover; Carlon 1-Gang Duplex Cover; Wellman 100 Watt, 120 Volt Strip Heater; Hubbell 2” Pole Top Fitting; Buss STY Fuse Holder; Hubble 9333-R 30 Amp, 250V, 90º Range Cap; 30 Amp, 480 Volt, 4 Pole Twist-Lock Plug; 30 Amp, 120/208 Volt, 3ØY Twist-Lock Plug; 30 Amp, 125/250 Volt, 4 Pole Twist-Lock Plug; 30 Amp, 125/250 Volt, 4 Pole Twist-Lock Receptacle; 30 Amp, 125 Volt, 3 Pole Twist-Lock Receptacle; 30 Amp, 125 Volt, 3 Pole Twist-Lock Plug; 20 Amp, 250 Volt, 3 Pole Twist-Lock Plug; 20 Amp, 125/250 Volt, 3 Pole Twist-Lock Plug; 20 Amp, 250 Volt, 4 Pole Twist-Lock Plug; 15 Amp, 125 Volt, 3 Pole Twist-Lock Plug; 15 Amp, 250 Volt, 3 Pole Twist-Lock Plug; 15 Amp, 277 Volt, 3 Pole Twist-Lock Plug; 15 Amp, 125/250 Volt, 3 Pole Twist-Lock Plug & Receptacle; 15 Amp, Single Pole, Ivory Touchette Switch; 15 Amp, Three-Way Ivory Touchette Switch; 15 Amp, Three-Way Brown Touchette Switch; 15 Amp, Four-Way Ivory Touchette Switch; 15 Amp, Four-Way Brown Touchette Switch; 15 Amp, Double Pole, Ivory Touchette Switch; 30 Amp, 250 Volt, Cord Set; Stainless Steel, 1 Gang, Single Outlet Covers; Stainless Steel, 1 Gang, Duplex Outlet Covers; Stainless Steel, 2 Gang, Switch Covers; 4”/16” Double Duplex Covers; 1/4” Eye Bolts; 3/8” Eye Bolts; 3/4” X 1-1/2” Hex Bolts; 3/4” X 1-3/4” Hex Bolts; 3/4” X 2” Hex Bolts; 5/8” X 5-1/2” Hex Bolts; 5/8” Hex Bolts; 3/4” Lockwashers; 1/4” – 20 X 3/8” Machine Screws; 1/4” – 20 X 1/2” Machine Screws; 1/4” – 20 X 3/4” Machine Screws; 1/4” – 20 Hex Nuts; 1/4” – 20 X 2” Hex Head Bolts; 3/8” X 1/2” Hex Head Bolts; 3/8” X 1” Hex Head Bolts; 3/8” X 3/4” Hex Head Bolts; 3/8” X 1” Hex Head Bolts; 3/8” X 1-1/4” Hex Head Bolts; 3/8” X 1-1/2” Hex Head Bolts; 3/8” X 2” Hex Head Bolts; 1/2” X 1” Hex Head Bolts; 1/2” X 1-1/4” Hex Head Bolts; 1/4” X 1-1/4” Plaster Washers; 1/4” AJ Anchors; 5/6” AJ Anchors; 3/8” AJ Anchors; 1/4” Short Lag Screw Shield; 3/8” X 3” Toggle Bolt; 1/4” X 4” Toggle Bolt; 1/4” Self Drill Anchors Red Head; 1/4” Self Drill Anchors Star; 3/8” Self Drill Anchors Star; 5/16” Lead Screw Anchors; 1/4” X 4” Lag Bolts; 3/8” X 3” Lag Bolts; 3/8” Short Lag Shields; 3/8” Long Lag Shields; 3/8” Rod Couplings; 3/8” X 10” Anchor Bolts; 3/8” X 18” Anchor Bolts; 1/2” X 18” Anchor Bolts; 3/4” X 18” Anchor Bolts; Under-Cabinet 4 Foot Fluorescent Fixture; 100 Watt Sodium Floor Fixture w/Lamps; Weatherproof Exit Light; 400 Watt Sodium Low Bay Fixture w/Lamp; Bronze Wall Mount Incandescent Fixture; Remote Emergency Heads; 30” X 30” Exhaust Fan Louver; Lot Duct Bank Chairs; 150W Sodium Security Light; Markel TB2101 1-Pole T-Stal; Lot Guy Cable; 194’, 130’, 124’ & 58’; 140’, 110’, 48’, 43’, 43’, 38’, 36’, 32’ & 25’; 3/8” Fan Grips; High Speed Steel Band Saw Blades 18 Teeth Per Inch; 5’6” Steel Fence Post; 6’ Steel Fence Post; 7’ Steel Fence Post; 45 Gallon Diala 68745 Transformer Oil; 1-1/4” HOPE Duct on Reel; Onan OT 400 Amp Automatic Transfer Switch; 12”, 5-Section Poly Signal Heads; 12”, 3-Section Poly Signal Heads; 12”, 2-Section Poly Signal Heads; Overhead Span Wire Signal Hanger w/ Tether Assy.; 2” Hubble Non-Metallic Flexable Conduit; 1/2” Liqutite Type LA; 3/8” Liquitite Type LT; 1/2” Liqutite Type DL; 3/4” Greenfield; #18 TFFN Str. White Wire; #18 TFFN Str. White Wire; #18 TFFN Str. White Wire; #18 TFFN Str. Black Wire; #18 TFFN Str. Black Wire; #18 TFFN Str. Brown Wire; #18 TFFN Str. Brown Wire; 1 Lot 1/4” Tread Plate 899-1/2 Sq. Ft. consists of the following pieces: 5’ 0” X 6’ 0”; 5’ 0” X 9’ 6”; 6’ 0” X 8’ 0”; 6’ 0” X 9’ 6”; 6’ 0” X 10’ 0”; 6’ 0” X 12’ 0”; 6’ 0” X 13’ 0”; 6’ 0” X 17’ 0”; Carrier Furnace w/ A-Coil; 125,000 BTU; Natural Gas & 5-Ton Condensor; ADP SEP-145A-5; 115,000 BTU; Natural Gas Unit Heater; ADP SEP-145A-3; 115,000 BTU; Natural Gas Unit Heater; Carrier Window Air Conditioner HCA343D; 32,000 BTU 240 Volt; Friedrich Window Air Conditioner SL28L30-D; 28,000 BTU 240 Volt; 54” Industrial Ceiling Fans 120 Volt.

Electrical Tools:
Rigid 700 Power Drive; Rigid 840 Universal Drive Shaft; Rigid 318 Oiler Bucket; Rigid 2-A Heavy Duty 1/8” — 2” Pipe Cutter; Rigid 202 Heavy Duty Wide-roll 1/8” — 2” Pipe Cutter; Rigid 2 Straight Reamer 1/8” — 2”; Rigid 450 Portable Tristand Chain Vise; Rigid 00-R Ratchet and Handle; Rigid 12-R Ratchet and Handle; Rigid 12-R #37470 1/4” Pipe Die Head; Rigid 12-R #37480 1/2” Pipe Die Head; Rigid 12-R #37485 3/4” Pipe Die Head; Rigid 12-R #37490 1” Pipe Die Head; Rigid 12-R #37495 1 1/4” Pipe Die Head; Rigid 12-R #37500 1 1/2” Pipe Die Head; Rigid 12-R #37505 2” Pipe Die Head; Rigid 46 Pipe Stand; Nye 88 Portable Tristand Yoke Vise; Nye 60 Ratchet and Handle; Nye Triad 1752315 3/4” Die Head; Nye Triad 1752915 1” Die Head; Greenlee 790 Hydraulic Pipe Pusher w/797 Hydraulic Pump powered by an 8HP Gas Engine; Greenlee 555 Bender for 1/2” — 2” Rigid and EMT Conduit; Greenlee 1/2” — 1 1/4” Rigid Shoe for 555 Bender; Greenlee 4-3/4” Rigid Shoe for 555 Bender; Greenlee 1/2” — 1 1/4” EMT Shoe for 555 Bender; Greenlee 1 1/2” — 2” EMT Shoe for 555 Bender; Greenlee 687 Wire Reel Stands; Greenlee 39257 4” Flexible Cleaning Mandrel & 4” Test Mandrel; Greenlee 851 Electric PVC Heater 1/2” — 4”; Greenlee 849 Electric PVC Heater 1/2” — 2”; Greenlee 850 LP Gas PVC Heater 1/2” — 5”; Greenlee 710 Stud Punch; Greenlee 7306SB Hydraulic Punch Slug-Buster 1/2” thru 2”; Greenlee 7304 Knockout Punch Kit 2 1/2” — 4”; Greenlee 1429 AV 2 1/2” Conduit Punch (NEW); Greenlee 1431AV 3” Conduit Punch (NEW); Greenlee 2982AV 3 1/2” Conduit Punch (NEW); Greenlee 2984AV 4” Conduit Punch (NEW); Greenlee 796 Ratchet Cable Bender; Greenlee 690 Blower & Vacuum Fish Tape System; Greenlee 438-200 200’ Fish Tape (NEW); Greenlee 840 1/2” EMT Bender (NEW); Greenlee 841 3/4” EMT Bender (NEW); Greenlee 842 1” EMT Bender (NEW); Enerpac S-34 1 1/4” — 2” Thinwall Hdy Bender w/Hand Hdy Pump; Enerpac S35A 1 1/4” — 2” Thinwall Hdy Bender less pump; Ensley E-793 PVC Expanding Plugs 2” — 6”; Skill 736 Roto-Hammer Drill; Skill 708 Roto-Hammer Drill; Skill 708 Roto-Hammer Drill (NEW); Skill 700 Sawzall; Lot of New Skill Bits for 708 Hammer Drills: 5 — 1/4” X 6” ”A” Taper Carbide Bit; 1 — 1/2” X 12” ”A” Taper Carbide Bit; 3 — 3/4” X 9” ”A” Taper Carbide Bit; 1 — 7/8 X 8 Carbide Bit; 6 — A Taper Adapter; Lot of Bits: 2 — 3/4” Ground Rod Driver for 736 Hammer; 1 — 5/8” Ground Rod Driver for 736 Hammer; 1 — 2” X 24” Core Bit for 736 Hammer; 1 — 2 1/2” X 24” Core Bit for 736 Hammer; 2 — 2” X 24” Spiral Bit for 736 Hammer; 1 — 1 1/2” X 24” Spiral Bit for 736 Hammer; 1 — 1 1/4” X 24” Spiral Bit for 736 Hammer; 1 — 3/4” X 18” Spiral Bit for 736 Hammer; 1 — Flat Chisel Bit for 736 Hammer; 1 — Pointed Chisel Bit for 736 Hammer; 1 — Spade Chisel Bit for 736 Hammer; Pilot 500 Utility Tapering Tool; Hilti DX100-L Power-Piston Drive Tool; Hilti 25-Cal #200 Boosters Purple for DX100-L; Hilti 25-Cal #150 Boosters Red for DX100-L; Hilti 25-Cal #75 Boosters Green for DX100-L; Hilti 25-Cal #120 Boosters Yellow for DX100-L; Hilti ENK-17 DX 1/2” Pins; Hilti 740DX 1 1/8” 1/4” – 20 Studs; Hilti TM7 3/8” Hammer Drill (NEW); Hilti TM7 3/8” Hammer Drill (USED); Dayton 3Z130 1/2 Ton Floor Mount Hyd Crane w/12 volt DC Winch; Hotbend Heat Gun PVC Torch; Dayton 2Z671 100 Amp Arc Welder 115 Volt; Hougen Model 10900 Magnetic Drill with: 1 — 9/16” Bit; 1 — 13/16” Bit; 1 — 7/8” Bit; 1 — 1” Bit; Hilman 2-SL 3 3/4 Ton Swivel Flat top machine rollers w/two steering Handles; Milwaukee 4110 2-speed Diamond Core Drill w/two 13” suction pads, Vacuum pump, water tank, ammeter and bit extension; Lot of New Core Bits: 1 — 5” X 14” Open Back Milwaukee Core Bit; 3 — 4 1/2” X 14” Open Back Milwaukee Core Bit; 3 — 4 1/4” X 14” Open Back Milwaukee Core Bit; 4 — 3 1/2” X 14” Open Back Milwaukee Core Bit; 2 — 2 1/2” X 14” Open Back Milwaukee Core Bit; 2 — 2” X 14” Open Back Milwaukee Core Bit; 4 — 1 3/4” X 14” Open Back Milwaukee Core Bit; 4 — 1 1/2” X 14” Open Back Milwaukee Core Bit; 4 — 1 3/8” X 14” Open Back Milwaukee Core Bit; 6 — 1 1/4” X 14” Open Back Milwaukee Core Bit; Lot of Used Core Bits: 3 — 6” X 14” Open Back Milwaukee Core Bit; 3 — 5” X 14” Solid Back Milwaukee Core Bit; 1 — 3” X 14” Solid Back Milwaukee Core Bit; 1 — 2 1/2” X 14” Solid Back Milwaukee Core Bit; Milwaukee 0228-6 3/8” Drill (NEW); Shermand & Reilly crossarm string blocks single conductor, 2500 lbs.; Anderson VC6-FT Hydraulic Wire Crimper; T&B TBM-8 Hand Wire Crimper #8-500 MCM in carrying case; Lot of listed Molds: 5 — Cadwell Mold GTC-182Q 4/0 — 3/4” Rod; 1 — Cadwell Mold GTC-162C 1/0 — 5/8” Rod; 1 — Cadwell Mold GTC-162Q 4/0 — 5/8” Rod; 1 — Cadwell Mold GTC-372Q 4/0 — 1” Rod; 1 — Cadwell Mold GRC-161V #2 — 5/8” Rod; 2 — Cadwell Mold GRC-182G 2/0 — 3/4” Rod; 2 — Cadwell Mold GRC-182L 3/0 — 3/4” Rod; 1 — Cadwell Mold TAC-2C1V 1/0 Run — #2 Tap; 1 — Cadwell Mold TAC-2G2G 2/0 Run — #2/0 Tap; 2 — Cadwell Mold TAC-2Q2C 4/0 Run — 1/0 Tap; 2 — Cadwell Mold TAC-2Q2Q 4/0 Run — 4/0 Tap; 1 — Caldwell Mold PGT-1G1G #6 Run – #6 Tap; 1 — Caldwell Mold TAC-1T1T #2 Run – #2 Tap; 1 — Caldwell Mold TAC-2C2C 1/0 Run — 1/0 Tap; 1 — Caldwell Mold VFR-2V 250 MCN — Vertical Steel Surface; 1 — Caldwell Mold VFC-2G 2/0 — Vertical Steel Surface; 1 — Caldwell Mold PTC-040 4/0 Run – #4 Tap Parallel; 1 — Thermoweld Mold M-503 #2 — 5/8” Rod; 1 — Thermoweld Mold M108 #6 Run — #14 Tap; Caldwell Mold Handle Clamp; Caldwell Mold T321 Rasp; Caldwell PLUS Control Unit #PLUSCU; Caldwell GR1161GPLUS #6 — 5/8” Rod (NEW); Lot of Rope: 660’ of 1” Rope; 228’ of 7/8” Rope; 222’ of 7/8” Rope; 268’ of 3/4” Rope; 564’ of 5/8” Rope; 590’ of 5/8” Rope; 190’ of 3/4” Rope; Wire Reel Jack Stands; Hdy Pump on wagon; Milwaukee 6226 Bandsaw; Milwaukee 0228-6 3/8” Drill; Milwaukee 3/8” Hammerdrill; Milwaukee 1/2” Drill; Milwaukee Sawzall; Milwaukee 6230 Bandsaw; Steel Storage Box; Wire Wagon for 2500’ Reels; Wire Wheel for 2500’ Reels; Conduit Wagon; Aluminum Ladder Carts; Vermette 520 Duct Lift; Cable Benders; Power Cable Preparation Tools; Indentor Crimp Tools; Conduit Dies; Strikers; Hand Benders; 3 — 1 1/4” EMT Hand Bender; 10 — 1” EMT Hand Bender; 5 — 3/4” EMT Hand Bender; 5 — 1/2” EMT Hand Bender; Cable Hoist; Chain Hoist; Chain Binder; Chain Hoist; Rope Hoist; Milter Box; Bench Grinder; Wood Plane; Meat Saw; Waterbed Pump; 3/4” Impact Wrench; 1-1/2” — 1” Impact Sockets; 2 — 1 1/8” Impact Sockets; 2 — 15/16 Impact Sockets; 1 — 3/4” Swivell; 1 — 3/4 – 1/2” Adapter; 1/2” Torque Wrench; Battery Charger 50 Ampere; Gas Power Post Hole Auger; Safety Belts; 50-Foot 50 Amp 240V Ext. Cord; 100-Foot 50 Amp 240V Ext. Cord; 100-Foot 20 Amp 120V Ext. Cord; 75-Foot Welding Leads; 50-Foot Cutting Torch Hose (NEW); Tool Buckets; Tool Body Belt w/2 Pole Straps; Pole Climbers; Rope Lanyard; Rebar Lanyard; Body Harness; High Voltage Gloves & Bag; 3-Phase Grounding Cables w/Installation Hot Stick; Telescoping Hot Stick; 8-Foot Hot Stick; SC Fuse Pullers; Grounding Hot Sticks; ACSR Grips .16-.55 8000 Lb.; ACSR Grips .53-.74 8000 Lb.; ACSR Grip .16-1.62 5000 Lb.; 6-Foot 1 1/4” Straight Line Cover; Pulling Grips for Fence; Bumper Jack; Scissors Jack; Ladder Jacks; Masonry Drill Bits; Drill Bit Extensions; Auger Wood Bits; Burring Reamers; 2 Crimping Tools; 2 Wire Strippers; 2 Coax Strippers; 2 Punch Down Tools; Allen Wrenches; Conduit Wire Guides; Soldering Irons & Guns; 1/2” Socket Set; 1/2” Socket Set w/ Wrenches; 1/2” Sockets 1 1/4” — 7/16”; Copper Tube Crimping Tool; Shackes; Split Rings & Quick Links; Ball-Pin Hammers; Acetylene, Oxygen & Water Gauges; Chain Binders; Wire Wheels (NEW); Portband Blades (NEW); Bolt Cutters; Ratcher Cable Cutters; Motorola 2-Way Radios; 14-Wire Pulling Grips; 1/4” & 3/16” Rope (NEW); 3 Reels 1/4” X 1,284’, 619’ & 244’; 1 Reel 3/16” X 300’; 2 — 1/4” Pulling Rope on stands; 1 — 3/16” Pulling Rope on stand; 1/2” Pulling Rope on stand; 4 — Shuder Hammers; 1 — Axe; 10 — Rope Block Sheaves; 1/8” Fish Tapes; 1/4” Fish Tapes;;; 1 — 36” Pipe Wrench; 1 — 24” Pipe Wrench; 1 — 14” Pipe Wrench; 1 — 10” Pipe Wrench; 1 — 6” Pipe Wrench; 1 — 2 1/2” Chain Wrench; 1 — 18” Strap Wrench; 2 — 1/4” X 350’ Duct Rodders; 1 — 1/4” X 195’ Duct Rodders; 100’ 12-3 Extension Cord on Reel; 3/8” – 1 1/4” Socket Set (NEW); Jack Stand w/Roller; Hilti TE92 Hammer Drill; Hilti TE15 Hammar Drill; 2 — 5” Hilti Core Bits; 1 — 4” Hilti Core Bits; 1 — 3 1/2” Hilti Core Bits; 2 — 3” Carbide Bits, by 18” long; 1 — 1 1/2” Carbide Bits, by 18” long; 3 — 2” Carbide Bits, by 18” long; 1 — 1 1/2” Carbide Bits, by 18” long; 2 — 1 1/4” Carbide Bits, by 18” long; 1 — 1 3/8” Carbide Bits, by 18” long; 1 — 1 7/8” Carbide Bits, by 18” long; 1 — 3/4” Carbide Bits, by 18” long; 3 — 5/8” Carbide Bits, by 18” long; 3 — 1 1/4” Carbide Bits, by 30” long; 1 — 1 1/2”Carbide Bits, by 30” long; 1 — 1 1/4” Carbide Bits, by 30” long (NEW); 1 — 3/4” Ground Rod Driver; 1 — 1 1/2” Hex Socket; 1/2” Offset Bender; Lot of Chisels; Sections of Scaffold 5’ X 8’ w/3 sets of Wheels; 24” X 8’ Aluminum Scaffold Boards; Manhole Sheave Frame; Buss – Bar Bender to fit Enerpac Hdy Ram; Wire Reel Carts; Wire Coil Cart; Wire Reel Jack Stands; Pry Bar Mules; Construction Signs: 2 — Road Construction Ahead (NEW); 2 — Road Construction Ahead; 1 — Left – Right Lane Closed Ahead; 2 — Flagman; 2 — Men Working; Construction Sign Stands; Traffic Cones 24”; 2” Core Bit for Side Arm Grinder w/Conditioning Block; 7 1/4” Circular Saw; Conduit Fishing Blow Rope Kit; 50’ Cord Reel; 3 — 50’ Extension Cords; 1 — 100’ Extension Cord; Roller Chain (NEW); Jumper Cables; Crowbars; Cutting Torch Cart; Lincoln 225 Amp Welder; Milwaukee Chop Saw on Bench & Conveyor Table; Honda EX100 Generator; Honda EM2500X Generator; Propane Burner & Tanks; Billy Goat Vacuum w/ 14 1/2 HP Motor; DeWalt DC970 18 Volt Battery Drills; 4’ 6” X 4’ X 3’ Wire Baskets; 6’ Stepladders; 8’ Stepladders; 10’ Stepladders; 12’ Stepladders; 6’ Stepladders (NEW); 8’ Stepladders (NEW); 32’ Extension Ladder; 24’ Extension Ladder; 5/8” X 4’ 3.9-Ton Cable Slings; C-Clamps: 7 — 8” Heavy Duty; 2 — 4” Heavy Duty; 1 — 3” Heavy Duty; 7 — 3” Light Duty; 3 — Vise Grip Pilers; Welding Equipment: 2 — Helmets; 3 — Clipping Hammers; 4 Prs. — Gloves; 2 — 24” Squares; 5 — Hand Saws; 1 — Drill Brace; Greenlee 916 Cable Reel Transporter; Hazard Warning Devices; Pelsue Free Standing Integral Frame Tent; Large Wire Reel Racks; 1/2 HP, 115/230 Volt Motor with a 30 Ratio Gear Box Attached; Construction Fence; Post Hole Diggers; Trench Shovels; Shovels Round Point & Flat; Rakes; Pick Axes; Dirt Probes; 6’ & 5’ Wedge Point Bar; 1 — Sickle, Edger & Leaf Rake; Dock Plate — 5’ Wide X 6’ Long; Pallet Jack; Cant Hook w/4’ Handle; Wood Pole Lifting Tongs; 4’ Johnson Levels; Comtec Fish Grabber; Hydraulic Pole Tamper; 1 — 3 1/8” Socket 1” Drive; 2 — 3 1/8” Open End Wrench; 2 3/4” Open End Wrench; 2 1/2” Open End Wrench; 2 3/8” Open End Wrench; 2 1/4” Open End Wrench; 2 1/8” Open End Wrench; 2” Open End Wrench; 1 7/8” Open End Wrench; 1 3/4” Open End Wrench; 1 5/8” Open End Wrench; 1 11/16” Open End Wrench; 1 1/2” Open End Wrench; 1 7/16” Open End Wrench; 1 3/8” Open End Wrench; 1 1/4” Open End Wrench; Wash Machine; Barrels Camouflage Net; Box of Hand Files; Rain Gear; 2 1/2” X 14’ Pike Poles; Measuring Wheel; Justrite Safety 5 Gallon Fuel Can; Reddy 30,000 BTU Propane Heater; Flame Propane Engine Heater; Hoover 1000 Gallon Above-Ground Concrete Vault Tank with Transfer Pump;; E.F. Johnson Radios Model 242-8600; E.F. Johnson Model 239-0226 – 101/111/121 w/ 2428600 Radio, Shure Bros. Microphone; E.F. Johnson Model XTBM694EFJ Microphone; Secode Electronics Model 25157-0211 Extender; 36” X 7’0” Metal Shelves; 36” X 6’0” Metal Shelves; 30” X 48” Metal Cart 4-Wheel; 30” X 48” Metal Cart 2-Wheel; 3/8” – 1-1/2” Greenfield Vise.

Test Equipment:
Pasar OT-1000 Open Tracer; Associated Research 5472 Mobile DC HYPOT Syastem Output 50 KV with Constant voltage transformer on cart; Weston Industrial Analyzer Model 639 — consists of a volt meter, ammeter, watt meter, and power factor; meter; General Electric Type AK-3 Power Factor Meter; Simpson Model 388 Therm-O-Meter; Greenlee 2011 Circuit Seeker; Greenlee 5775VS Wire Sorter; Brady XC Printer; Amprobe 300SVA AC Current Recorder w/Multibyers; Amprobe LAV3X AC Voltage Recorder; Amprobe RS-3 Amp Meter and accessories in leather case with Phase Sequence Adaptor and two additional Amp; meters; Fluke 322 Amp Meter; Fluke 23 Multmeter; Biddle 21159 Insulation Megger; Supreme 0-480 Voltage Meters; Knopp Phase Rotation Meter; Distance Range Finder; Beckman LM22A Digital LCR Meter; IRD 808 Mechanalysis Troubleshooter; 3M 6355 Universal Hot Melt Kit for Fiber Terminations; Simpson Model #260 Volt/Ohm Meter; Triplet Model #630 Volt/Ohm Meter; Simpson Model #463 A/C Volt Meter 0-300 V; Sencore Model HP200 50KV High Voltage Probe; Sells as 1 Lot: 2 – Weston #964AC 0-300 V. AC Meter; 1 – Simpson #60607 0-300 V. AC Meter; 1 – Simpson #56650 0-100 A. Amp Meter; 1 – Weston C-SD 0-60 A. Amp Meter; 1 – Westinghouse RX35 0-2.5KV DC Meter; 1 – Westinghouse N41 0-300 A. Amp Meter; 1 – Simpson Model 1306 75A C.T.; 1 – Simpson Model 1297 100A C.T.; Tripet Model 736 AC Volt Meter 0-300 V.; Simpson DC Volt/Amp Meter Comb.; Calrad Model #45-738 DC Power Supply; Charge-About Model DVP-312 Regulated Power Supply 1-150 Volt; Dayton Model 54905A Battery Charger 2 Amp; Calrad Model # VC6 Regulated Power Supply 1-150 Volt; Sells as 1 Lot: Westinghouse RA-351 Ammeter 0-150A; 2 – Westinghouse RA-351 AC Volt Meter 0-3KV; 1 – Westinghouse RA-351 Amp Meter 0-150A; 1 – Weston 205P AC Volt Meter 0-150V; 1 – General Meter 5205 Volt 0-500V; Sencore Model FE27 Big Henry Field Effect Multimeter; Sencore Model DVM38 Digital Volt, Ohms, Amp Meter.

NO RESERVE AUCTION!

After a long and successful career in the electrical business, Butch has decided to downsize and sell the above listed equipment at absolute unreserved auction! Everything has been very well cared for, neatly catalogued for the auction and will suit the most particular person! Possibly 2 auction rings throughout part of the day; therefore, please come prepared with an extra bidder(s). Live internet bidding will be available on some of the major pieces of equipment. Auction personnel will be available sale day to assist in loading out. Lunch available on the grounds. Not responsible for accidents, errors or omissions.

Supreme Electric Co. Auction

For more information, call:
Equipment Questions: Kent (Butch) Morgan (217) 242-3764



or email Our Office at [email protected]
©2016. All Rights Reserved. Presented by GPCink® -- Gallatin Publishing Co., 609B S. Main, Gallatin, MO 64640 -- Ph: 660.663.2154 ©
For Northwest Missouri, visit…
Northwest Missouri Realty Logo
For Northeast Missouri, visit…
Northeast Missouri Realty Logo
For South Iowa, visit…
Hawkeye Realty Logo
GPCink Logo
GALLATIN PUBLISHING COMPANY
609B South Main, Gallatin, MO 64640
Ph: 660.663.2154
Client Login